Carpenter gear in Staten Island

Carpenter gear in Staten Island has a reputation for being the most personal kit on any jobsite. The boots, the belt, the hammer, the tape — every guy has the version they like, and they will not be moved off it. Quazi Supply at 519 Port Richmond Avenue carries enough variety that you can come in with a preference and walk out with that exact boot, that exact belt, that exact pouch layout. Eleven to eight, seven days a week.

Boots. The carpenter standard is a wedge-sole moc-toe. Wolverine Floorhand wedge, Thorogood American-Made 814-4200 in the moc-toe wedge, Red Wing Heritage 875 for the guy who wants the classic. The wedge sole is flat — does not pick up debris, does not scuff finished floors, comfortable on plywood and OSB and slab all day. The moc-toe is comfortable in a different way — the seam across the toe gives the foot room to splay when you are squatting and standing all day.

Soft-toe is acceptable in carpentry. Most framers and finish carpenters work in a soft-toe wedge. Composite or steel-toe if your jobsite requires it or if you are on a job with a lot of falling-object risk. EH rating not required unless you are doing electrical work as part of the build.

Pants. Carhartt Rugged Flex Rigby is the most popular carpenter pant on Staten Island, period. The reason is the four-way stretch in the duck — a real Carhartt duck weight that takes abrasion, but with enough movement that the squat-and-stand of framing does not blow it out. Carhartt Double Front B01 for guys who want the heavier traditional duck. Dickies double-knee for the guys who run shorter on the budget. We carry 28 to 50 waist, 28 to 36 inseam.

Tops. Carpenters want long sleeves most of the year. Heavy canvas long-sleeve henleys for cold work, Carhartt Force long-sleeves for shoulder seasons, flannels for fall and spring. The traditional carpenter flannel — a midweight cotton flannel over a t-shirt — is honest and it works. Carhartt Hubbard, Dickies sherpa-lined for cold framing days.

Tool belt. This is where carpenters get particular. A leather framer's belt with a hammer loop on the dominant side, a tape clip on the off side, deep nail pockets, a utility-knife sleeve. Carhartt and Rothco both make solid leather belts; we carry the Diamondback-style four-pouch rigs and the leather Occidental-style for the higher end. We let you try them on the floor with your actual hammer and tape — if a belt does not sit right with your specific tools, do not buy it. Come back when we have the next shipment.

Tape measure. Twenty-five-foot magnetic-tip is the carpenter standard. The magnetic tip catches a metal stud or a beam from across a span, which is the difference between measuring with one guy and needing two. We carry the standard yellow tapes at the counter, and we keep an open one for guys who want to feel the tape extension before they buy.

Hammer. Twenty-two-ounce framing hammer for framers, sixteen-ounce finish hammer for trim work, claw or rip depending on whether you do more pulling or more tear-out. We carry both heads in wood-handle and hickory-handle and steel-handle. Wood handle is lighter and easier on the elbow over a long career; steel is more durable for tear-down work. Personal call.

Gloves. Lighter than what a mason or ironworker wears. Nitrile-coated grip gloves for general framing, leather rigging for heavy lifts, A4 cut-resistant for any sheet-metal flashing or ductwork that sneaks into the day. Three pairs in the truck.

PPE. ANSI Z87.1 safety glasses, clear and tinted. Hearing protection for any saw or nailgun work — earplugs and earmuffs both. A respirator for cutting MDF, treated lumber, or any old-house demo where lead paint is a possibility. P100 cartridges, half-face. Hard hat on commercial sites.

Knee work. Carpenters spend less time on the knees than masons or drywall finishers, but the pads matter for trim work, baseboard, hardwood floor install. Pocket-insert knee pads in the Double-Front pants are the carpenter standard. Strap-on for finish work where the slide-in does not stay in place.

Custom printing. Shop name and crew name on jackets, hoodies, t-shirts. Embroidered chest, screened back. Run on the building. Apply for a fleet account at /services/fleet-and-crew-accounts/apply for net-30 and volume on five units or more.

Jobsite delivery — Staten Island same day, the other four boroughs next day for most stops.

519 Port Richmond Ave. Eleven to eight, seven days. We have the moc-toe in your size.